Aluminum Extrusion cnc from China manufacturer talks about the process performance of mold maker!
The manufacturing of a mold maker generally requires several processes such as forging, cutting, and heat treatment. In order to ensure the manufacturing quality of the mold maker and reduce the production cost, its material should have good forgeability, machinability, hardenability, hardenability and grindability; it should also have small oxidation, decarburization sensitivity and Tendency of quenching deformation and cracking. Let’s follow the Aluminum Extrusion cnc from China manufacturer editor to have a brief look at it!
It has low hot forging deformation resistance, good plasticity, wide forging temperature range, low tendency of forging cracking and cold cracking and precipitation of networked carbides.
2. Annealing processability
The spheroidizing annealing temperature range is wide, the annealing hardness is low, the fluctuation range is small, and the spheroidizing rate is high.
The cutting amount is large, the tool loss is low, and the machined surface roughness is low.
4. Sensitivity to oxidation and decarburization
When heated at high temperature, the oxidation resistance is good, the decarburization speed is slow, the heating medium is not sensitive, and the tendency of pitting is small.
After quenching, it has uniform and high surface hardness.
After quenching, a deeper hardened layer can be obtained, and it can be hardened by using a mild quenching medium.
7. Tendency of quenching deformation and cracking
Conventional quenching has small volume changes, shape warping, slight distortion, and low tendency of abnormal deformation. Conventional quenching has low sensitivity to cracking, and is insensitive to quenching temperature and workpiece shape.
The relative wear of the grinding wheel is small, and the limit of grinding without burn is large. It is not sensitive to the quality of the grinding wheel and cooling conditions, and it is not easy to cause abrasion and grinding cracks.
The above is the editor of Aluminum Extrusion cnc from China manufacturer: I hope you can learn more about the relevant knowledge of mold maker process performance.
3D printing from China manufacturer is a kind of rapid prototyping technology, also known as additive manufacturing. It is based on digital model files, using powdered metal or plastic and other bondable materials to construct by layer-by-layer printing. Object technology.
The printer reads the cross-sectional information in the file, prints these cross-sections layer by layer with liquid, powder or sheet-like materials, and then glues the cross-sections of each layer in various ways to create an entity. The characteristic of this technology is that it can make almost any shape of objects.
Most aluminum extruders use the traditional machined extrusion process with an extruder-on-a-boiler to form the aluminum-alloy bed in a large chamber.
A standard 5mm 3D printer extrusion can use standard 0.75mm filament to 3D print some parts5mm material is the easiest to print at the speed of the 3D printer.
The china Metal products supplier industry includes structural china Metal products supplier manufacturing, metal tool manufacturing, container and metal packaging container manufacturing, stainless steel and similar daily-use china Metal products supplier manufacturing, etc.
Different molding mold makers have been used in many fields. In addition, the manufacturing technology of professional mold maker has changed and developed in these years. Therefore, in this part, the general design rules of vacuum molding mold maker are summarized.
REQUEST A QUOTE
We aim to develop world class innovation capabilities
Keeping us the forefront cutting edge of digital manufacturing technologies
Address in Zhongshan,PRC:
C Bldg,Yixian Road No.112,
Torch Development Zone,Zhongshan,Guangdong